Preparing to take off Salvation 25
1)Extend the antenna on the Radio Controller and switch the controller "ON".
2)Switch the helicopter on ("ON/OFF" switch on the left side of main body).
3)Place the helicopter on a flat, hard surface with the tail pointing towards you and the nose facing away from you. Extend the blades separately, or it maybe entangle each other and cause blade breaking, or burn out the motor.
4)Make sure the left throttle lever to the lowest position firstly, and then move it fully forward and backward. By doing this, the controller will be armed and connected to the helicopter, while the red LED keep stable lighting.
Taking off Salvation 25
1)Move the left lever slowly forward – the blades will start to spin.
2)As you move the left lever past the halfway point, the helicopter will lift off.
3)To ascend, move the left lever further forward. To descend, slowly move the left lever backwards.
Steering Salvation 25
1)To turn the nose of the helicopter left, move the right hand lever to the left.
2)To turn the nose of the helicopter right, move the right hand lever to the right.
3)To fly the helicopter forwards, move the right hand lever forwards.
4)To fly the helicopter backwards, move the right hand lever backwards.
Landing Salvation 25
To land the helicopter, slowly move the left lever backwards.