The First 3CH Combat Helicopter
It’s one of the breakthroughs in this industry. We are the first manufacturer who product the 3CH helicopter with combat function.
Digital Controlled
Digital controlling system allows the 3 helicopters to combat in the air together stably and easily.
Best for Indoor
It’s the best remote control helicopter for indoor playing ever in the R/C world.
Strong Rotor Structure
The carbon fiber rotor is with the safest and lightest structure to avoid damages. Moreover the unique dual rotor structure makes the flying more perfect.
Speed-motor
Excellent flying stability with the powerful motor of the precise speed-control.
High Capacity of Li-Po Battery
The Li-Po battery which has auto-protection provides more than 10 minutes flight durations of more than 10 minutes per charge.

1) 3CH digital proportional and super wide IR control.
2) Bands A,B&C allow up to three models to start in the battle at the same time.
3) Built-in Li-Poly Batteries for long flying time.
4) Precision speed control and excellent flying stability.
5) Charging directly from the transmitter, also we can provide another two charge way to choose, One is by USB, and another is by AC/DC charger.
6) For players age at 8 or up.

Preparing for take OFF:

1) Switch handset ‘ON’, LED light on handset will begin to flash.
2）CAUTION: Please make sure the left joystick is in the lowest position before turning on the handset.
3） Move the left joystick on the handset fully forward and fully back, and this will arm the controller and connect to the helicopter. (LED will light up RED)
4）Switch the helicopter ‘ON’(Switch on side of fuselage)

Launch time: Take Off and Landing
1) Move the left joystick slowly forward – the rotors will start to spin
2) As you move the joystick past the halfway point the helicopter will lift off
3）To ascend- move the left stick further forward (Very small adjustment are needed as controls are sensitive)
4）To descend- slowly move the stick backwards

Steering:-
1) To turn the nose of the helicopter left, move the right hand joystick to the left
2) To turn the nose of the helicopter right, move the right hand joystick to the right
3) To fly the helicopter forwards, move the right hand joystick forwards. The joysticks are very sensitive, small controlled movements should be used at all times.
4) To fly the helicopter backwards, move the right hand joystick backwards

Landing:
To land the helicopter slowly move the left joystick backwards, before the helicopter touches the ground give the left joystick a quick burst upward to cushion landing.

Using the trim controls:
The Trim Control tab is located between the two control sticks. This enables the helicopter to hover without any unwanted tendencies. During flight, if the nose tends to turn left, turn trim control to right and vice versa.

Combating
Tri-band switch (A, B, C) allow 3 players to play together. A different frequency for each player.
1) Ensure each handset is adjusted consecutively. Be certain that all other handsets are turned “OFF” when adjusting the band on each handset.
2) Turn handset “ON” and switch band (A, B, C) to the appropriate setting. Each player must have a different band.
3) Turn helicopter “ON” and push left hand throttle stick fully forward and backward to arm helicopter.
4) Push left joystick forward, helicopter will begin to take off and fight.
5) To fire at another helicopter, push the Fire Button on the top right corner of the controller.
6) Once press the Fire Button, the related weapon voice would be released from the controller and the red LED light would be light on.
7) Any one of the Salvation12 is hit for the first 2 time with a laser burst from another Salvation12, the helicopter will spin. The third time, fall down and not respond to the controller for a short while.
8) Push left joystick forward again, the helicopter will begin to fight for another round.

There are three options when charging The Salvation 12 Helicopter
a) Salvation 3 Handset (Included in box)
b) A/C Adaptor
c) USB Charging Cable

a) Charging from Salvation12 Handset:
1. Ensure helicopter is switched ‘OFF’
2. Slide down cover and remove charging cable from handset
3. Connect the end of the charging cable to the charging socket located on the left side of helicopter. Do not force, if correctly installed the cable will attach with ease
4. Switch handset ‘ON’
5. Both GREEN and RED LED light will appear
6. Charging is complete when RED light goes out and GREEN light remains ‘ON’ (First charge 60-80 minutes then subsequent charging time 30 minutes)
7. Switch ‘OFF’ handset and remove cable from helicopter, return charging cable to original position in handset
8. Leave battery to cool for five minutes
9. You are now ready to fly

b) Charging from A/C Adaptor:
1. Ensure helicopter is switched ‘OFF’
2. Plug A/C adaptor into power socket. A RED LED light on the adaptor will come ‘ON’
3. Connect the end of the charging cable to the charging socket located on the left side of helicopter. Do not force, if correctly installed the cable will attach with ease
4. When connected, light on charger will go ‘OFF’. Charging is complete when LED light on the adaptor comes ‘ON’ (First charge 60-80 minutes then subsequent charging time 30 minutes)
5. Remove A/C adaptor from power socket and detach charging cable from helicopter
6. Leave battery to cool for five minutes
7. You are now ready to fly

c) Charging from USB Charging Cable:
1. Ensure helicopter is switched ‘OFF’
2. Connect USB cable to computer
3. Attach the end of the USB charging cable to the charging socket located on the left side of helicopter. Do not force, if correctly installed the cable will attach with ease
4. Charging is complete when RED LED light appears on the USB cable (First charge 60-80 minutes then subsequent charging time 30 minutes)
5. Remove USB cable from computer and detach from helicopter socket
6. Leave battery to cool for five minutes
7. You are now ready to fly