Strong LED Light
Strong LED light will bring you unbelievable experience to pilot the helicopter at night.
Long Control Distance
It performs pretty well up to 40m height in the sky without any problem.
High Quality
Using top-quality engineering and materials in everything, it provides you the maximum level of value and fun.
Great Stability Performances
Co-axial structure and strong metal frame enables it to fly stably indoors and outdoors with impressive performances.
Fashionable Design
Its aggressive new body design looks fantastic in flight and is unlike anything else out there.

1.Strong LED light enable the helicopter fly at night without any problem.
2.Co-axle structure to ensure stable flying and easy control.
3.2CH control enables the chopper to fly up, down, left, right.
4.Have long control distance that can flight as height as 40m.
5.Impress big size and strong metal frame for outdoor flying
6.Proportional radio controlling system allows the helicopter to hover in the air stably.

Preparing to take off Salvation 29
1)Extend the antenna on the Radio Controller and switch the controller "ON".
2)Switch the helicopter on ("ON/OFF" switch on the left side of main body).
3)Place the helicopter on a flat, hard surface with the tail pointing towards you and the nose facing away from you. Extend the blades separately, or it maybe entangle each other and cause blade breaking, or burn out the motor.
4)Make sure the left throttle lever to the lowest position firstly, and then move it fully forward and backward. By doing this, the controller will be armed and connected to the helicopter, while the red LED keep stable lighting.

Taking off Salvation 29
1)Move the left lever slowly forward – the blades will start to spin.
2)As you move the left lever past the halfway point, the helicopter will lift off.
3)To ascend, move the left lever further forward. To descend, slowly move the left lever backwards.

Steering Salvation 29
1)To turn the nose of the helicopter left, move the right hand lever to the left.
2)To turn the nose of the helicopter right, move the right hand lever to the right.

Landing Salvation 29
To land the helicopter, slowly move the left lever backwards.

1.Ensure the helicopter is switched off.
2.Plug the AC charger into a wall socket, and ensure socket is turned on. The indicator light on the adapter shall light up RED, also both the RED indicator light and the GREEN indicator light on the charger box should appear.
3.Connect the battery plug of helicopter to the charger socket, and the RED indicator light on the charger box will be OFF. Kindly noted that the plug will be easily connected to the socket and does not need to be forced together as it only fit one way as shown in the illustration shown.
4.If the Red Charger Indicator will still on, please check following:
A.If indicates that the connection goes wrong.
B.Or the error with battery, please check the whether the battery has been damaged.
C.The adapter is damaged.
5.Charging is complete when the indicator light on the charger box lights up RED.
6.Switch off the AC charger at the wall socket and remove the battery plug from the charger socket.
7.Leave the battery for 5 minutes to cool.
8.It will take 1.5-2 hours for full charge for the first few times, and then only take 60 minutes for a full charge.
Charging: Connect the battery to the charger box as shown in the illustration, do not force.